Oulai Si MPL from the dry metallic ink Product Description: I. Overview: MPL from the dry metallic ink is a high-grade imported acrylic resin and pigment through advanced combination of fine grinding system with excellent gloss, good adhesion, resistance impact resistance, gasoline, alcohol, anti-fold and so on. Add special hardener can increase adhesion, improve hardness. Second, the performance: suitable for 40T ~ 165T (100 mesh to 420 mesh) screen printing, with 120T polyester monofilament, sensitive adhesive coated screen computing coverage area of ??35 to 40 square meters per kg three solvents: PTS dedicated open water or 783 slow dry water; four, safety standards: in line with European toy ten metal EN.71 testing standards. V. Scope: iron, aluminum, alloy sheet; glass, plastic plating, PP, ABS plastic type products, screen printing or spraying. 6, the product features: 1, iron, aluminum, alloys, glass products have a good connection force; 2, high gloss, feel good, good leveling, surface smooth; 3, good surface hardness, high impact resistance, anti- scratch, anti-fold; 4, resistance to gasoline, alcohol-resistant level is good; Seven, use: 1, the use of add thinner, stir; 2, multi-color overprint, before the next color is dry after printing need; Ink Parameter: 1, pre-treatment: the product surface degreasing, wax and the like; 2, open oil: Stir before use, to stand in for 5-10 minutes, the production may be added to adjust the viscosity our special diluent (according to 1 : 0.7 ratio, or as the case may add thinner), the use of other diluent before use to make the production of matching experiments. 3, spraying: drying of the ink film thickness requirements 20-30um; Screen Printing 77T-100T can be screen printing; 4, pre-bake: hot air drying cycle 80 ℃ -90 ℃ / 10-15 minutes; 5, Exposure: Georgia 6-8 , (21-foot cell exposure); 6, imaging: 0.8% -1.2% Na2CO3 solution, rinse, a pressure of about 2KG / cm2, temperature of 30 ℃ ± 2; 7, after the roast: 150 ℃ / 30 min (etch); 8 etching; 9, to Mexico: with 10% NaOH at 90 degrees ultrasonic bath for about 1-3 minutes to remove the ink.